CAD for fabrication and engineering

From customer drawing to cut part.

Trammel is 2D CAD for fabrication shops and mechanical designers. Open the customer's DWG, draw or correct the part, dimension it for the shop floor and export a clean DXF for the laser, plasma or waterjet.

Built for part drawings

Precise geometry, fast.

Exact input

Absolute, relative and polar coordinates and direct distance entry. Snap to endpoints, centres, tangents and intersections.

Fillets, chamfers and offsets

Radius corners between lines and arcs, chamfer edges and offset profiles for clearances and bend allowances.

Hole patterns

Rectangular and polar arrays place bolt circles and slot patterns in one command.

Engineering dimensions

Linear, aligned, radius, diameter and angular dimensions, centre lines and hidden-detail linetypes, with leaders for notes.

DXF for cutting

Join outlines into closed polylines and export DXF for laser, plasma, waterjet and punching software.

Assemblies from blocks

Draw a component once, save it as a block and insert it wherever it is used, at any scale and rotation.

Customer files

Open the DWG you were sent and get on with the job.

Enquiries arrive as DWG and DXF in every version. Trammel opens them directly, so you can check a dimension, quote from the real geometry and pull the profile you need.

  • DWG from R13 to 2018, DXF from R12
  • Measure distances, areas and perimeters for quoting
  • Issue drawings as PDF, DWG or DXF

DWG editor features

Thickness and 3D

Give a flat pattern its material thickness and check it in the 3D view, or export STL.

Drawing sheets

Title block, views at different scales and notes on A3 or A4, plotted to PDF.

Offline in the workshop

Runs without an internet connection on the office PC or the machine-side laptop.

One-off cost

A perpetual licence is £249. No monthly bill per machine.

For workshops and design offices

Fabrication CAD FAQ

Can I make DXF files for laser or plasma cutting?

Yes. Draw or import the profile, join it into closed outlines and export DXF in the 2000 or R12 format, which cutting software reads.

Is Trammel suitable for mechanical drawings?

Yes, for 2D detail and assembly drawings with engineering dimensions, centre lines, hidden lines and section hatching.

Can it open a customer's DWG file?

Yes. DWG in formats from R13 to 2018 and DXF from R12 onwards open directly.

How is it licensed for several machines?

A Professional licence covers one person on up to three computers. A Team licence is £79 per seat per year with two computers per seat.

Try it on a live job.

Licences from £96 a year or £249 once. Your licence key arrives in seconds.